Metatech Thermal Spray Private Limited
Metatech Thermal Spray Private Limited
Odhav, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL
 

Paper Industry-M.G. Cylinders

Be very smooth to give quality work. But due to 24/7 usage of the cylinder. There is ware out problem, which has to be solved without dismantling the cylinder. We have very much experience in this work and have done many such work in given time with quality and at competitive rates. The M.G. Cylinder regains its life due to metalizing followed by grinding. The original thickness with the same property can be retained by this process. This also helps to resist corrosion.

Paper Industry-Pope Reel

By doing Thermal Spray on the pope reel the hardness becomes twice of the original. The wearing out of surface decreases. The quality of paper is also improved productivity of the plant increases.

Paper Industry-Pulp Mill

It is an important part in the manufacturing unit of paper. As it is exposed to large amount of chemicals, there is wearing out of the parts. We do thermal spray on the screws to increase the efficiency.

Paper Industry-Gear Box

Gear Box gets damaged from inner side due to which its internal diameter gets expanded. In this case repairing it is a very challenging job. We have successfully carried out this challenge by metalizing the inner dimensions to the accurate followed by machining.

Paper Industry-Vacuum Pumps

We do Thermal Spray on Vacuum Pump Rotor and casing from inside. This increases the potentiality of the machine. As this part requires more of maintenance, our thermal spray reduces the frequency of maintenance and hence time and money both are saved.

Paper Industry-Dryers

Dryers again are the important part of the paper Industry as they require smooth surface on the cylinder for high quality paper otherwise may result in low quality and paper break. Thermal Spray can solve these problems and increases the potentiality of the dryer for more production.

Power Generation-Hydro Power Plant

Sealing face, bearing area, babbitted bearings. Due to metalizing, turbine life increases and its capacity also increases. The machine retains its efficiency more than the original one. We have also sprayed pure silver on the turbine return ring. We are the first one to carry out this type of spray. This results in high conductivity.

Power Generation-Thermal Power Plant

  • Thermal coating in pressure vessels
  • Rotor, Shaft & casing of fans/blowers
  • Boiler Tube

Power Generation-Oil And Gas

Ball Valves, Plungers, Piston rods, Pipe lines, etc. are the components that are in continuous use. Due to the maintenance work increases resulting in high expenditure. But because of these ceramic coating is the best remedy for it.

Power Generation-Chemical Fertilizer

Erosion due to chemical action. Metalizing is the best solution to this problem. The different parts that get affected by corrosion are Compressor Rod, Pump Sleeves, Pump Casing, Ball Valves.

 

 

Power Generation-Refineries

The most precise jobs in this field is in the field of refineries. There is a vast range of application in this field. All the corrosion and surface wear out problems of refineries can be solved by Thermal Spray Technology.

 

zoomup


Reach Us
Bhavik Patel (Director)
34, Panchjanya Industrial Estate, Near Thakor Engineering
Odhav, Ahmedabad- 382415, Gujarat, India



Call Us

Share Us

F GT L


Send E-mailSend SMS